Necesarias
Permiten el funcionamiento básico del sitio y guardan tus preferencias de privacidad. Siempre están activas.
DALI
DALI OPTICON 1 MK2
SKU: 247018
₡700 000
Descubre el OPTICON 1 MK2
Experimenta la verdadera esencia de la música con el DALI OPTICON 1 MK2. Diseñado meticulosamente en Dinamarca, este equipo representa la cúspide de la ingeniería acústica de DALI (Danish Audiophile Loudspeaker Industries), entregando una claridad asombrosa, graves profundos y una escena sonora increíblemente amplia.
Perfil de Sonido
El perfil acústico del OPTICON 1 MK2 destaca por su transparencia y precisión. Disfrutarás de un rango medio cálido, agudos nítidos sin estridencias y unos bajos controlados que dan vida a cada nota musical, permitiéndote escuchar tus grabaciones favoritas tal y como el artista las concibió.
Características Destacadas
- Tecnología SMC Exclusiva: Reduce drásticamente la distorsión mecánica, garantizando un sonido puro en cualquier nivel de volumen.
- Conos de Fibra de Madera: La firma de DALI. Proporcionan un equilibrio perfecto entre ligereza y rigidez, eliminando resonancias no deseadas.
- Tweeters de Ultra Baja Masa: Ofrecen una respuesta en frecuencia extendida para agudos cristalinos y precisos.
- Construcción Artesanal Danesa: Cada componente ha sido diseñado y ensamblado con los más altos estándares de calidad europeos.
¿Para quién es ideal?
El DALI OPTICON 1 MK2 es la elección perfecta para entusiastas del Home Theater y audiófilos que no se conforman con menos que la perfección. Ya sea para disfrutar de música en estéreo de alta resolución o como parte de un sistema de cine en casa envolvente, elevará tu experiencia auditiva al siguiente nivel.
Disponible
Producto agregado al carrito
Especificaciones
| Crossover Frequencies [Hz] | 3,000 |
|---|---|
| Frequency Range [+/- 3 dB] [Hz] | 62 - 25,000 |
| Low/Mid Frequency Driver(s) | 1 x 4¾ inch |
| Maximum SPL [@ 1m] [dB] | 105 |
| Recommended Amp. Power [watts] | 25 - 100 |
| Sensitivity [2.83V/1m] [dB] | 85 |
| Crossover Principle | 2-way |
| High Frequency Driver(s) | 1 x 29 mm soft dome |
| Nominal Impedance [ohms] | 4 |
CaracterÃsticas
- The OPTICON 1 MK2 is a compact stand-mount speaker that delivers remarkable bass performance for its size that integrates perfectly with the inherent midrange and high-frequency quality of its drivers.
- HIGH-PERFORMANCE AUDIO: The OPTICON 1 MK2 builds on the impressive MK1 series to create a true 2-way compact performer. Designed for small to medium-sized rooms, this high-performance bookshelf speaker includes our signature wood fibre cone and patented low-loss SMC magnet system, delivering low distortion, minimal colouration and high power handling. The OPTICON 1 MK2 is fully assembled at our production facilities in Denmark using components produced in-house or sourced from the best local specialist manufacturers and further afield.
- REFLEX-LOADED SPEAKER: As a reflex-loaded speaker, the OPTICON 1 MK2 channels unused acoustic output generated by the woofer to extend low-frequency bandwidth and increase power handling. Using a dual flare shape that minimises turbulence at the entry and exit flares, the OPTICON 1 MK2 brings port design into the realm of aerodynamics.
- PATENTED SMC: The OPTICON 1 MK2 driver magnet system consists of a large ferrite ring magnet surrounding a pole piece manufactured entirely of the unique DALI SMC (Soft Magnetic Composite) material. The use of SMC greatly reduces mechanical distortion caused by hysteresis and eddy currents, resulting in a drastic reduction in third-order distortion for extended listening pleasure, a relaxed midrange and a surprising amount of detailing.
- LIGHTWEIGHT SOFT DOME: The lightweight 29 mm soft dome tweeter is derived from our CALLISTO C series and offers significant advances over the tweeters used in the OPTICON MK1 series. The relatively small increase in diameter over the previous 28 mm tweeter results in lower distortion, higher power handling and extended low-frequency response. The 29 mm tweeter is also used throughout the OPTICON MK2 series for consistent tonal character and dispersion characteristics, for example in a multichannel surround setup.
- WOOD FIBRE WOOFER: The 4¾" OPTICON 1 MK2 bass/midrange driver has been designed according to our sound design principles of low loss, low distortion and low colouration. The ideal driver plays only what the amplifier supplies... nothing is added, nothing is taken away. Every OPTICON 1 MK2 component is carefully designed to contribute towards this goal, including the paper pulp and wood fibre cone, which ensures minimal break-up resonance for a high resolution midrange and precise, coherent bass.
- MANUFACTURED IN DENMARK: With a 25 mm thick front baffle and extra internal bracing, the OPTICON 1 MK2 cabinet is extremely rigid and practically eliminates panel resonance. To ensure the best possible quality product, we manufacture and test OPTICON MK2 series speakers at our production facilities in central Denmark, carrying out everything from cutting and routing of the wood laminate panels to installing the drivers and crossover.
- EXPERIENCE SOUND: Lars Worre shares some of the original thoughts that went into developing the OPTICON MK2 series.