TEAC TN-400BTX Edición Especial

Specifications

Turntable section   Type Belt Drive Motor DC Motor Rotation Speeds 33-⅓, 45, 78 rpm Wow-and-Flutters 0.2% S/N Ratio more than 67dB (A-weighted)
60dB (unweighted, 20kHz, LPF) Turntable (Platter)   Material Aluminum Die-cast Diameter 30cm Tone-arm section   Type S-shaped, Static-balanced Effective Length 223mm Needle Pressure Range 0g to 5g Compatible Cartridge Weight 4g to 8g
14g to 18g (including Head-shell) Head-shell and Cartridge sections   Model of Cartridge audio-technica AT95E Type of Cartridge MM-type (VM-type) Frequency Response 20Hz to 20,000Hz Output Voltage 3.5mV (1kHz, 5cm/sec.) Channel Separation 20dB (1kHz) Output Balance 2.0 dB (1kHz) Needle Pressure 1.5g to 2.5g (appropriate value: 2.0g) Needle Life approx. 300 hours (depends on conditions) Coil Impedance 2.8kohms (1kHz) DC Resistance 410ohms Loading Resistance 47kohms Loading Capacity 100 to 200pF Coil Inductance 400mH (1kHz) Static Compliance 20 × 10-6cm/dyne Dynamic Compliance 6.5 × 10-6cm/dyne (100Hz) Needle Shape Joint-oval 0.3 × 0.7mil Cantilever Aluminum Pipe Vertical Tracking Degree 20 degrees Overall Dimensions 17.0(W) × 17.2(H) × 30.5(D) mm Weight 5.7 g Head-shell Weight 10g (including nuts, screws, and wires) Analog Output section   Connectors RCA jack × 1 pair (Gold-plated) Output Voltage   PHONO 3.5mV +/-3dB LINE 155mV (-16dBV) Bluetooth® section   Bluetooth version 5.2 (DUAL MODE) Profile A2DP Codecs SBC, Qualcomm® aptX™ audio, Qualcomm® aptX™ Adaptive Operation Power   AC Adapter Input AC 100 - 240V, 50/60Hz AC Adapter Output DC 12V 500mA Power Consumption 1.5W or less Standby Power 0.5W or less Dimensions (including protrusions) 420(W) × 117(H) × 356(D) mm /
16.5"(W) × 4.6"(H) × 14.0"(D) Weight 4.9kg / 10.8lbs Operating temperature range 5°C to 35°C Included Accessories Felt Mat, EP Adapter, Counter Weight, Headshell (audio-technica AT95E installed), Platter, Dust Cover, Dust Cover Hinges × 2, RCA Audio Cable with GND wiring, AC Adapter (GPE053A-V120050-Z), Owner's Manual (including Warranty Card)

Features

• Robust high-density MDF plinth provides both vibration isolation and elegance
• Available in a selection of contemporary matt finishes, or a natural walnut veneer
• 3-speed belt-drive mechanism with aluminum die-cast platter (33-⅓, 45, 78 rpm)
• Low-resistance spindle for stable rotational speed
• Static-balanced S-shaped tone-arm with universal-type headshell
• Pre-installed MM-type AT95E cartridge from audio-technica
• Built-in Phono EQ Amplifier
• High-quality Bluetooth® Qualcomm® aptX™ and Qualcomm® aptX™ Adaptive wireless audio transmission
• Floating-construction using decoupled feet provides high feedback resistance
• Machined aluminum operation knobs and feet