TEAC AP-505

Specifications

Amplifier section Maximum output power

Stereo, Bi-amp modes
130W + 130W (4Ω, 1kHz, JEITA)
90W + 90W (8Ω, 1kHz, JEITA)
BTL (Bridge) mode
250W (8Ω, 1kHz, JEITA)
Rate output over

Stereo, Bi-amp modes
115W + 115W (4Ω, 1kHz, THD 0.8%)
70W + 70W (8Ω, 1kHz, THD 0.8%)
BTL (Bridge) mode
220W (8Ω, 1kHz, THD 0.8%)
Total harmonic distortion
0.0015% (8Ω, 1kHz, 12.5W, JEITA)
Signal-to-Noise ratio
113dB (8Ω, 1kHz, IHF-A)
Frequency response
10Hz to 50,000Hz (+0dB, –5dB, 8Ω, 1W, JEITA)
Dumping factor
370 or higher, JEITA (20Hz to 20kHz, Output impedance: 22mΩ, 8Ω loaded)
Input section

LINE IN (Balanced)

Connector
XLR (2: HOT) × 1 pair
Input sensitivity
1.3V (Output 8Ω, THD 1%)
Input impedance
10kΩ or higher
LINE IN (Unbalance)

Connector
RCA Pin (gold-plated) × 1 pair
Input sensitivity
0.66V (Output 8Ω, THD 1%)
Input impedance
10kΩ or higher
Speaker outputs

Connector
Screw type × 1 set (gold-plated, AWG8 and Banana-plug compatible)
Compatible speaker impedance

Stereo, Bi-amp modes
4Ω to 16Ω
BTL (Bridge) mode
8Ω to 16Ω
Power
AC220 to 240V, 50Hz (UK/Europe)
Power consumption
106W
Standby power
0.1W or less (at Auto power-saving mode)
Overall dimensions
290 × 84.5 × 271 mm / 11.4" × 3.3" × 10.7" (W × H × D)
Weight
4.4kg / 9.7 lbs.
Included accessories
Power code, Owner's manual (including warranty)