Envío gratuito en pedidos mayores a $500
TEAC TN-5BB
TEAC

TEAC TN-5BB

SKU: teac-tn-5bb-manual-belt-drive-turntable

₡1 099 995

Descubre el TEAC TN-5BB

El buque insignia analógico TEAC TN-5BB fusiona mármol artificial, papel Washi y MDF en un chasis sin resonancias, portando un revolucionario sistema de brazo automático.

Perfil de Sonido

Maestría acústica. Bajos viscerales, rango medio de presencia espectacular y agudos cristalinos, sin la más mínima vibración de fondo.

Características Destacadas

  • Zócalo híbrido pesado (mármol artificial, acrílico y MDF).
  • Plato grueso de acrílico translúcido de alta inercia.
  • Brazo con rodamientos knife-edge de SAEC (PRS3).
  • Salidas XLR balanceadas para una conexión pura al previo.

¿Para quién es ideal?

Audiófilos experimentados dispuestos a invertir en un giradiscos de referencia que extraiga hasta la última gota de música del microsurco.

Disponible
Ver Carrito

Especificaciones

Specifications

Turntable section Drive system Rotation-detection-type high-precision control belt drive
Motor
DC motor
Rotation speed
33-⅓rpm, 45rpm, 78prm
Wow and flutter
0.1% or less
Platter
Acrylic, 30cm diameter
Tonearm section

Arm type
Static-balanced S-shaped tone arm
Effective arm length
223mm
Suitable cartridge weight
4.0 to 13.0g (14 to 23 g including head-shell)
Overhang
18mm
Arm height adjustment range
approx. 6mm
Cartridge section

Type
MM
Output voltage
5.5 mV (1kHz, 5cm/s)
Tracking force
1.8g
Cartridge weight
7.2g
Included head-shell weight:
10g (including screws, nuts and wires)
Replacement record stylus model
Ortofon 2M Red • Stylus lifespan depends on use conditions but is usually about 1000 hours.
Phono Outputs

Balanced

Connector
XLR × 1 pair
Unbalanced

Connector
RCA × 1 pair
Power
AC 100 to 240V, 50/60Hz (AC Adapter)
Power Consumption
2.0W or less (0.3W at Standby)
Overall Dimensions(W×H×D)
450 × 148 × 351 mm / 17.1" × 5.8" × 13.8" (with dust cover closed)
450 × 420 × 410 mm / 17.1" × 16.5" × 16.1" (with dust cover open)
450 × 135 × 351 mm / 17.1" × 5.3" × 13.8" (with dust cover removed)
Including protrusions (when arm holder at the highest position)
Weight
approx. 10.5kg / 23.2 lbs.
Included accessories
45RPM adapter × 1, Counterweight × 1, Head-shell (Ortofon 2M Red installed) × 1, Platter × 1, Flat Belt × 1, Pulley Cover × 1, Dust Cover × 1, Hinge × 2, Foot height adjustment washers × 4, Arm height adjustment hex wrench × 1, RCA Audio Cable × 1, Ground wire × 1, AC Adapter (GPE018S-120100-Z) × 1, Cartridge Alignment Gauge × 1, User Manual × 1